Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Installation Across Edmonds
A new garage door installation in Edmonds typically runs $700-$2,200 depending on size, material, and whether the opening needs structural adjustment. Most Edmonds homeowners choose steel or custom wood doors, with installations scheduled within one to two weeks of measurement. Call (425) 305-4847 for a free, written estimate - we’ll measure your opening, photograph any existing damage, and deliver a flat price before any work is scheduled.
We serve Edmonds from our Seattle office, with crews running daily routes through the Bowl, Westgate, and the upland neighborhoods along 100th Avenue West. Whether you’re replacing a rotted wood door on a 1960s ranch near Edmonds Community College or upgrading a single-car garage in the hillside above the ferry terminal, we bring the door, the opener, and the hardware in one trip. No partial installs, no return visits for forgotten parts. That’s how we work in Edmonds.
Why Servo Garage Doors Redmond Is Edmonds’s Preferred Garage Door Installation Company
We’ve installed garage doors in Edmonds since 2015, and the patterns here are distinct from our routes in Lynnwood or Bothell. The salt-laden Puget Sound air that blows through the Bowl and up Sunset Avenue corrodes torsion springs and cables at roughly twice the rate you’d see inland. Our Edmonds customers know this because we show them the rust during our free estimate - Clause 4 of our Garage Door Installation protocol requires the technician to photograph any failed or failing component before quoting replacement.
Our 365-Day Done Right Promise applies to every Edmonds installation. If the door doesn’t balance, seal, or operate as quoted, we return and make it right. No coupon required, no argument. We’ve completed over 18,000 garage door jobs since 2015, every one with a written price before work started and a documented photo record when the technician left. Edmonds homeowners receive the same documentation: photos of the opening, the installed hardware, and the completed door, delivered by text or email before we pull out of your driveway.
Calls to (425) 305-4847 are answered by a live person 24 hours a day, including holidays. You’ll get a named technician and an on-the-way text, not a four-hour callback window.
Our Garage Door Installation Services in Edmonds
New Door Installation
A typical new door installation in Edmonds runs $700-$2,200, with most homeowners in the $1,100-$1,600 range for a quality steel sectional door with standard hardware. We measure the rough opening, check headroom and side-room clearances, and quote a flat price that includes removal of the old door, disposal, new tracks, springs, cables, rollers, and installation labor. In Edmonds’s older neighborhoods - the 1950s ranches near 76th Avenue West, the split-levels climbing the hillside toward Woodway - we often find original single-car garages with 8-foot openings that can’t accommodate modern trucks. We quote what it takes to make it work, including header modification if needed, and we write it down before you decide.
Single Car Door Installation
Single-car doors in Edmonds are often original to homes built during the postwar boom, and many are narrower or shorter than current standards. A replacement single-car steel door installation typically falls between $700 and $1,400 in this market. We carry 8-by-7 and 9-by-7 steel doors from Clopay and Wayne Dalton on our trucks, and we can order custom heights for garages with limited headroom. The hillside topography in Westgate and the Bowl means some Edmonds garages have sloped concrete or uneven jambs - we shim and seal properly, not with temporary fixes that fail in the first winter.
Double Car Door Installation
Double-car door installations in Edmonds generally range from $1,200 to $2,200, depending on insulation rating, window configuration, and whether you need a heavy-duty opener to handle the weight. Many Edmonds homeowners upgrading from two single doors to one wide double door need structural header reinforcement - we identify this during measurement and include it in the written quote, not as a surprise add-on. The persistent marine dampness here means we spec galvanized or stainless hardware as standard on waterfront-adjacent jobs, not as an upgrade.
Custom Garage Door Installation
Custom garage doors in Edmonds - carriage-house styles, flush wood panels, or aluminum-and-glass contemporary designs - start around $1,800 and can exceed $2,200 depending on material and size. We work with Amarr and Raynor for custom orders, with typical lead times of three to four weeks. For homeowners in the Bowl or along the bluff, we often recommend cedar or marine-grade plywood with proper sealing schedules, because Edmonds’s year-round moisture absorption causes unprotected wood panels to swell, warp, and throw off door balance within two to three seasons. We document the sealing requirements in your paperwork so you know what maintenance looks like.
Steel Doors
Steel sectional doors are the practical choice for most Edmonds installations. We stock 24-gauge and 25-gauge steel doors with polyurethane or polystyrene insulation, rated for the wind exposure that comes off Puget Sound. A standard insulated steel door installation in Edmonds runs $900-$1,600. The salt air is the reason we don’t cut corners on hardware - we use corrosion-resistant bottom brackets and high-cycle springs on every waterfront-adjacent job, because a standard spring that lasts ten years in Bothell may fail in five on Sunset Avenue.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Edmonds
We install and service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor - and we stock common parts for all eight brands on our Edmonds service trucks. For installation work, we most often recommend LiftMaster belt-drive openers for their quiet operation and reinforced rail strength, which matters on heavier custom doors. Wayne Dalton’s TorqueMaster spring system works well for Edmonds homeowners with limited headroom. We don’t push brands that don’t hold up in this climate; our recommendation is based on what we’ve seen fail and what hasn’t, documented across thousands of local jobs.
Common Garage Door Installation Problems We See in Edmonds Homes
- Torsion springs rust through prematurely near the waterfront. The salt-laden marine air in the Bowl and along Sunset Avenue corrodes standard springs at roughly half their rated cycle life. We spec high-cycle springs (25,000+ cycles) with corrosion-resistant coating for these locations, and we document the spring rating in your photo record.
- Wood door panels swell and warp from year-round moisture. Edmonds’s persistent marine dampness causes unsealed wood doors to absorb water, expand, and bind in their tracks. This strains opener gears and can pull tracks out of alignment. We see this regularly in the older neighborhoods above 100th Avenue West, where original wood doors have never been properly maintained.
- Undersized garages don’t fit modern vehicles. The 1950s and 1960s ranches near Edmonds Community College often have 8-foot-wide single-car openings that can’t accommodate a full-size truck or SUV. We measure carefully and quote header modification or alternate door configurations when a standard replacement won’t work.
- Steep driveways complicate opener installation and calibration. The pronounced hillside topography in upland Edmonds produces garages with sloped approaches or tucked-under construction. Standard opener limit switches need precise calibration in these conditions, and photo-eye sensors require careful alignment to avoid false obstruction readings.
Pricing for Garage Door Installation in Edmonds, WA
Here’s what garage door work costs in the Edmonds market. Every price is written and agreed before work starts - Clause 1 of The Haven Standard.
| Service | Price Range in Edmonds |
|---|---|
| New Door Installation | $700 - $2,200 |
| Opener Installation | $250 - $550 |
| Garage Door Repair | $150 - $600 |
What moves you within these ranges: door size, material (steel vs. wood vs. aluminum/glass), insulation rating, window inserts, hardware grade, and whether the rough opening needs structural modification. A standard 16-by-7 insulated steel door with no windows and standard hardware falls near the middle of the installation range. A custom carriage-house wood door with full glass and heavy-duty hardware pushes toward the top. We don’t quote over the phone for installation work - we measure, photograph, and deliver a written price. The price you agree to is the price on the invoice. Call (425) 305-4847 to schedule your free estimate.
We Also Serve Cities Near Edmonds
Our installation crews run regular routes through Edmonds, Lynnwood, Bothell, Mill Creek, and Woodinville. The same written-price-first standard and documented photo record apply in every city we serve. If you’re between Edmonds and one of these neighboring communities, we schedule based on route efficiency, not city limits.
Serving Edmonds, WA - Our Local Coverage Area
We’re based in the Edmonds area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Edmonds
Yes. The salt-laden Puget Sound air in the Bowl and along streets like Sunset Avenue corrodes standard torsion springs at roughly twice the rate you’d see in Lynnwood or Mountlake Terrace. We install high-cycle springs with corrosion-resistant coating on waterfront-adjacent Edmonds homes, and we document the spring rating and expected service life in your photo record. Call (425) 305-4847 for a free estimate - we’ll inspect your current hardware and quote what this location actually needs.
A standard chain-drive opener can handle the weight if the door is properly balanced, but the steep approach and tucked-under construction common in upland Edmonds neighborhoods often require precise limit-switch calibration and reinforced rail mounting. We typically recommend a LiftMaster belt-drive unit with a reinforced rail for these conditions - the belt runs quieter and handles the vibration better on hillside installs. We measure the slope and headroom during your free estimate and spec the right opener, not the one we have extra of.
A new garage door installation in Edmonds typically costs $700-$2,200, with most homeowners paying between $1,100 and $1,600 for a quality insulated steel door with standard hardware. Custom wood or aluminum-and-glass doors start around $1,800. The price includes removal and disposal of the old door, new tracks, springs, cables, rollers, and installation labor. Structural modifications to the opening are quoted separately and in writing. Call (425) 305-4847 for a free measure and written estimate.
Edmonds’s persistent marine dampness and direct Puget Sound moisture cause unprotected wood door panels to absorb water year-round, expanding and warping enough to bind in their tracks. This strains opener gears, pulls tracks out of plumb, and creates gaps that compromise weather sealing. We see this most in the older neighborhoods above 100th Avenue West, where original cedar or fir doors have never been resealed. Our custom wood door installations include documented sealing schedules, and we often recommend marine-grade plywood or properly maintained steel as a longer-term solution.
You can replace just the springs. A spring replacement in Edmonds runs $180-$340, and we do this routinely. However, if your door is more than 25 years old, has multiple failing components, or the panels are rotted or dented, a full replacement may cost less over time than serial repairs. Our technician photographs the failed spring and inspects the full system during your free estimate, then quotes both options in writing so you can compare. The decision is yours - we document what we found and what each path costs. Call (425) 305-4847 to schedule.
Written by Marcus Deller, Owner at Servo Garage Doors, serving Edmonds since 2015.